10/100/1000BASE-T
Cable Specifications 10/100/1000BASE-T
Cable Specifications
|
Port Type
|
Connector |
Media
|
Maximum Distance |
|---|---|---|---|
| 10BASE-T |
RJ-45 |
Category 3, 4, or 5 unshielded twisted pairs (UTP) |
100m (328 ft) |
| 100/1000BASE-T1 | RJ-45 | Category 52 UTP | 100m (328 ft) |
11000BASE-T signaling requires 4 twisted pairs of Category 5 balanced cabling, as specified in ISO/IEC 11801:1995 and ANSI/EIA/TIA-568-A (1995) and tested for additional performance using testing procedures defined in TIA/EIA TSB95. 2Category 5 is the minimum requirement. Category 5e and Category 6 are fully supported. |
|||
|
Feature |
Specification |
|
|---|---|---|
| PCI Type Adapters (BCM5702, BCM5705, BCM5705M, BCM5788, BCM5788M) | ||
| PCI Data/Address |
32-bit |
|
| PCI Data Burst Transfer
Rate |
132 MB/s
|
|
| PCI Modes |
Master/Slave |
|
| PCI Express Type Adapters (BCM5751, BCM5751M, BCM5789, BCM5789M) | ||
| PCI Express Interface | x1 link width | |
| PCI Express Aggregated Bandwidth (transmit and receive) | 625 MB/s (1 lane) | |
| 10/100/1000BASE-T |
10/100/1000 Mbit/s (full-duplex) |
|
|
Condition |
Operating Specification |
Storage Specification |
|---|---|---|
|
Temperature |
0°C to 55°C (+32°F to +131°F) |
–40°C to +85°C (–40°F to +185°F) |
|
Relative Humidity |
5% to 85% (noncondensing)
40°C, 16-hr dwells at extremes |
5% to 95% (noncondensing)
10°C/hr |
|
Altitude |
Up to 10 000 ft |
Up to 35 000 ft |
|
Shock |
10g, 1/2 sine wave, 11 milliseconds |
60g, 1/2 sine wave, 11 milliseconds |
|
Vibration, peak-to-peak displacement |
0.005 in. max (5 Hz to 32 Hz) |
0.1 in. max (5 Hz to 17 Hz) |
|
Vibration, peak acceleration |
0.25g (5 Hz to 500 Hz)
(sweep rate = 1 octave/minute) |
0.25g (5 Hz to 500 Hz)
(sweep rate = 1 octave/minute) |